Spectra-precision ProMark 800 Reference Manual Manual de usuario descargar pdf (Pagina 145)

100

101

133

Appendix A. Using Serial Commands

Introduction to Serial Commands

Serial commands allow you to communicate directly with the

receiver in its proprietary command language. Serial

commands can be used for various purposes such as:

• Changing default settings

• Monitoring different receiver statuses (internal operation,

constellations, etc.)

• Outputting messages on request

• Installing firmware options, etc.

Serial commands fall into two categories:

• Set commands ($PASHS,...), used to set or modify the

receiver’s internal parameters.

• Query commands ($PASHQ,...), used to interrogate the

receiver.

Standard NMEA messages will all be output with the

standard ASCII NMEA preamble (e.g. $GPGGA) and not with

the “$PASHR..” preamble.

The few conventions used to describe the serial commands in

this manual are summarized in the table below.

String or

sign

Description

$PASHS Header for set commands (Whole line shown in bold characters)

$PASHQ Header for query commands (Whole line shown in bold characters)

$PASHR Receiver response line, in normal characters.

Header in standard NMEA output messages for results provided by

GPS.

Header in standard NMEA output messages for results provided by

GLONASS.

Header in standard NMEA output messages for results provided by

GALILEO.

Header in standard NMEA output messages for results provided by

GNSS (combination of several constellations).

$--

Header prefix for all standard NMEA messages delivered by the

receiver.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 427 428

Comentarios a estos manuales

Sin comentarios

Spectra-precision ProMark 800 Reference Manual Manual de usuario Pagina 145

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Spectra-precision ProMark 800 Reference Manual