Spectra-precision Survey Pro CE v3.6 User Manual Manual de usuario descargar pdf (Pagina 389)

Survey Pro Reference Manual

R-232

Traverse Adjust

The Traverse Adjust wizard is a series of screens that allow you to

adjust a closed traverse for angular error and/or perform a compass

rule adjustment on a closed or open traverse.

Choose Your Traverse

: is used to select a

traverse to adjust from the following options:

• : is used to tap an existing

polyline from a map view.

• : provides selection of points by

point name.

Angle Adjust

: When checked, will perform an

angle adjustment to the closed traverse. An

angle adjustment will apply the angular error

equally among all of the angles of the closed

traverse and adjust the coordinates for all but the first two traverse

points. (The first leg of the traverse is not adjusted.)

Compass Rule

: When checked, will perform a compass rule

adjustment on the selected traverse.

Adjust elevation

: when selected, the elevations for the traverse

points are also adjusted from the compass rule adjustment.

Adjust Sideshots

: When checked, any side shots that were stored

while occupying the traverse points in the selected traverse will also

be adjusted.

The side shot locations will be recomputed using the original angles

and distances stored in the raw data file along with the adjusted

locations of the occupy and backsight points.

The user cannot explicitly define the side shots that are adjusted.

Instead, they are determined by the information stored in the raw

data file. If no side shots were stored from any of the traverse points,

an error message will be displayed and no adjustment is performed.

If any of the following settings were changed during or after the

traverse was recorded, then side shots cannot be adjusted.

1 2 ... 384 385 386 387 388 389 390 391 392 393 394 ... 406 407

Sin comentarios

Spectra-precision Survey Pro CE v3.6 User Manual Manual de usuario Pagina 389