Spectra-precision Survey Pro CE v3.6 User Manual Manual de usuario descargar pdf (Pagina 113)

100

101

Screen Examples

107

4. Aim the total station toward the prism located at the side of the

new point and tap . The new point will be stored as a

side shot.

Note: The center shot and the prism shot can be taken in either

order.

Vertical Angle Offset Screen

The Vertical Angle Offset screen is used to store a new point that is

located directly above, or directly below the rod location. The routine

requires two shots by the total station, one at the prism, and one in

the direction of the new point.

This example explains how to store a point that is located above the

rod – such as at the top of a utility pole.

1. From the Main Menu

, tap ,

or use the

Ctrl

-[Q]

hotkey. If you have not already setup your

backsight, you will need to do so before the

Horizontal Angle Offset Shot

screen will

open.

2. With the prism positioned directly below

the location of the new point, aim the total

station at the prism and tap .

3. Aim the total station at the new point and

tap . (Only a zenith angle is measured during this

shot so a prism is not necessary.) A new point will be stored

with the same northing and easting as the rod location, but

with a different elevation.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 406 407

Comentarios a estos manuales

Sin comentarios

Spectra-precision Survey Pro CE v3.6 User Manual Manual de usuario Pagina 113

Comentarios a estos manuales