Spectra-precision Survey Pro v3.80 Recon iPAQ Reference Manual Manual de usuario descargar pdf (Pagina 131)

Stakeout Menu

R-125

: returns to the previous screen.

: accesses the next screen.

Offset Staking – Screen Three

The third Offset Staking screen is used to select the station and

section of the road to be staked and to specify an offset distance from

the design point.

Station to Stake

: is the station to be staked.

Station Interval

: specifies how far to advance from the current station

to the next station.

: advances the current station by the

Station

Interval

Note: When advancing, if you want to also stake the

locations where the alignment of the road changes, be

sure to check the

Stake “Corners”, Not Just Even Intervals

option in the Stakeout Settings card. Tapping the

button at the top of the screen will access the

Stakeout Settings.

/ : These buttons are used to select the section

of the road that you want to stake.

Offset from the segment above ___

: When checked, is

the offset distance that will be applied to the selected

design point. A positive offset extends from the design point away

from the centerline. A negative offset extends towards the centerline.

X-Slope (%)

: is the slope of the selected road section.

1/2 Road Width

: displays the width of the selected road section

defined in the previous screen. This value can quickly be edited from

this field.

: is the rod height.

: accesses the Backsight Setup

screen (Page R-78).

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 260 261

Sin comentarios

Spectra-precision Survey Pro v3.80 Recon iPAQ Reference Manual Manual de usuario Pagina 131