Spectra-precision Survey Pro CE v3.80 Ranger GPS Reference Manual Manual de usuario

SURVEY PRO for Windows® CE GPS Reference Manual 2002 Tripod Data Systems, Inc. All Rights Reserved

GPS Reference Manual 10 Auto Accept: is where you select to use criteria for automatic point acceptance. When checked, both the data and Offset Shot

Job Menu 11 Post Process Settings The Post Process card is used to configure the post processing raw data storage settings. Recording Interval:

GPS Reference Manual 12 Note: This function only works during post processing data collection using the session screen. For status during simultane

Job Menu 13 : opens the Receiver Communications screen, where many of the displayed communications settings can be changed. Receiver Communication Sc

GPS Reference Manual 14 : checks the receiver at all allowable baud rates to find the current receiver communication settings. If this function succ

Job Menu 15 Radio Communications Screen -or- The Radio Communications screen is used to change the settings for communication b

GPS Reference Manual 16 Radio Settings Screen -or- The Radio Settings screen is used to configure settings of the base or rover

Job Menu 17 Rover Radio Settings The Rover Radio Settings card is used to view and configure the settings for the radio used with the rover

GPS Reference Manual 18 RTK Configurations The RTK Configurations Settings card is used to configure automatic connection when RTK base and

19 Survey Menu – RTK The Survey Menu contains the routines used for collecting data. The screens below are available only when running Survey Pro in

ii TRIPOD DATA SYSTEMS SOFTWARE LICENSE AGREEMENT IMPORTANT: BY OPENING THE SEALED MEDIA PACKAGE, YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDI

GPS Reference Manual 20 GPS Status The GPS Status screen contains several index card-format screens providing information about the current GPS s

Survey Menu – RTK 21 • Code: we are receiving a code differential solution (precision is about 1 to 10 meters). • Float: we are receiving a carrier p

GPS Reference Manual 22 consistently greater than one second, check the radio link. Reception: displays the receiver’s estimation of the percent qual

Survey Menu – RTK 23 Position The Position card displays your current position as well as your course and speed information if you are moving. Positi

GPS Reference Manual 24 Base Height: displays the current height of the base point set in Survey Pro. Antenna: displays information about the antenna

Survey Menu – RTK 25 : opens the final Base Setup screen. The final screen depends on the base point you choose: • If the base point has existing ge

GPS Reference Manual 26 Base Point: displays the base point name chosen in the previous screen. Latitude: is where you enter the WGS84 latitude for t

Survey Menu – RTK 27 Phase CenterRadiusSlant OffsetVertical OffsetMeasurementPointMarkerVerticalHeightSlantHeightBase Receiver Antenna The

GPS Reference Manual 28 Note: When this screen is used by the RTK rover for updates of antenna height during a survey, the Set button will send the

Survey Menu – RTK 29 Measured: is where you enter the height of the antenna, measured to the location specified on the Rover Receiver Antenna screen.

iii Table of Contents Settings...R-6 Receiver Settings...

GPS Reference Manual 30 : opens the Rover Receiver Antenna screen, which is identical to the Base Receiver Antenna screen discussed on Page R-27 wher

Survey Menu – RTK 31 Check Control Point Screen The Check Control Point screen is used to check a control point. This is done when you want t

GPS Reference Manual 32 Occupy Control Point Screen The Occupy Control Point screen is used to add geodetic coordinates for a known project po

Survey Menu – RTK 33 Data Collection The Data Collection screen is used to collect new points for the current job. GPS Status: displays the curre

GPS Reference Manual 34 Feature Collection Screen The Feature Collection screen is used to partially automate the process of data collection.

Survey Menu – RTK 35 Interval: is where you enter the interval criteria used for continuous collection modes. The Interval field is not available if

GPS Reference Manual 36 Slope Dist / Horizontal Dist: is where you enter the slope distance or horizontal distance from the occupied point to the off

Survey Menu – RTK 37 : returns you to the previous screen, and depending on which screen was used to open the Occupy Data Points screen, will usually

GPS Reference Manual 38 Mapping Plane The Horizontal tab of the Projection screen is explained below for when the horizontal projection type is s

Survey Menu – RTK 39 : opens the Solve Localization screen, where the control points can be selected and the horizontal and vertical localization are

iv Line and Offset...R-84 Curve and Offset...

GPS Reference Manual 40 deletes the currently selected site or zone. Note: Delete cannot be undone. Also, you cannot delete system database record

Survey Menu – RTK 41 Grid and Azimuth Parameters: is where you select the grid azimuth and the positive coordinate direction. • North Azimuth: is whe

GPS Reference Manual 42 Projection Key In Setup - Oblique Mercator This page is only displayed when the Zone type is set to Oblique Mercator Angle.

Survey Menu – RTK 43 Values: is where you enter the values for the custom ellipse if you are not using Ellipse from List: Ellipse a: is where you e

GPS Reference Manual 44 the sign of the values before entering into Survey Pro. Projection Key In Setup - Datum from Data Base The following screen

Survey Menu – RTK 45 Ground - TDS Localization The Horizontal tab of the Projection screen is explained below for when the horizontal projection type

GPS Reference Manual 46 Localization Projection Setup The Localization Projection Setup screen is used to manually configure the parameters of t

Survey Menu – RTK 47 Localization Data Base The Localization Data Base screen is used to pick a localization reference stereographic map proje

GPS Reference Manual 48 Solve Localization The user interfaces for mapping plane calibration and TDS Localization are mostly identical. TDS Localiza

Survey Menu – RTK 49 Fix scale to 1.0: Check the Solve Rotation Only control to constrain the least squares solution to a scale of 1.0. Do this when

5 Job Menu A: Settings B: New C: Open D: Edit Points E: Edit Polylines F: Edit Alignments G: Auto Linework H: Save As I: Import Coordinates J: Export

GPS Reference Manual 50 A point list of all control points is displayed along with the residual or misclosure for each point (depending on least squa

Survey Menu – RTK 51 Vertical Card The Vertical card is used to manually enter the five parameters of the vertical localization solution. Slope N: is

GPS Reference Manual 52 : opens the Localization Calculator screen where the horizontal scale factor is explained. Rotation: is where you enter the r

Survey Menu – RTK 53 Localization Calculator – Rotation In order to compute the localization rotation, you need a known geodetic coordinate sy

GPS Reference Manual 54 Solve Localization – Results or or Horizontal Card The Horizontal card shows results of the horizontal localizat

Survey Menu – RTK 55 Vertical Card The Vertical card shows results of the vertical localization solution. Status: displays the status of the current

GPS Reference Manual 56 Vertical Card The Vertical card displays information about the currently selected horizontal projection method. If the

Survey Menu – RTK 57 : opens the Geoid Model Setup screen, where you can select a geoid to use with the current zone, change the geoid file of the se

GPS Reference Manual 58 Ellipsoid Height The Vertical tab of the Projection screen is explained below for when the vertical projection type is set to

Survey Menu – RTK 59 Remote Elevation The Remote Elevation screen is used to compute and store a new base point elevation and vertical site by occu

GPS Reference Manual 6 Settings The Settings screen opens several individual screens that control all hardware and software settings. The screens

GPS Reference Manual 60 : Updates the projection with the vertical solution calculated from the control point observation and updates the base point

Survey Menu – RTK 61 Receiver Recording The Receiver Recording screen is used to start or stop the receiver recording. When in RTK mode, it allows

GPS Reference Manual 62 title of this field changes depending on if the antenna has already been setup. Measured: is where you enter the height of th

Survey Menu – RTK 63 Readjust Points The Readjust Points screen is used to readjust selected points with the latest projection settings. The horiz

GPS Reference Manual 64 Readjust Points: Plane to Geodetic – Screen Two Points Selected: displays the number of points selected. : calculates the dif

Survey Menu – RTK 65 Readjust Points – Recalculate Results Displays the number of points that were adjusted and if any points were not adjusted, a br

GPS Reference Manual 66 Projection Calculator – Rotation Convergence: displays the computed rotation from geodetic north to grid north. Rotation: dis

Survey Menu – RTK 67 Projection Calculator – Scale Mapping Plane Scale Factor: displays the computed mapping plane scale factor on the selected mappi

69 Survey Menu – Post Processing The Survey Menu contains the routines used for collecting data. The screens below are available only when running Su

Job Menu 7 Receiver Settings The Receiver Settings card is used to select the GPS receiver make and model as well as the mode of differential da

GPS Reference Manual 70 GPS Status The GPS Status screen contains most of the same index card-format screens as the RTK Status case. When in Post

Survey Menu – Post Processing 71 Remaining: displays the time remaining in the current session if a session is in progress. If your receiver does no

GPS Reference Manual 72 Rec Interval: the recording interval set on the Post Process card of the Job, Settings screen (page R- 11). Mem. Threshold:

Survey Menu – Post Processing 73 screen, which is described on Page R-71, except that the user is not automatically taken to the session page after s

GPS Reference Manual 74 RTK data collection. If you are storing this point in the receiver file only, then the point control is replaced with a simp

75 Stakeout Menu The Stakeout Menu contains the routines used to stake existing points and other known locations. A: Stake Points B: Polyline Points

GPS Reference Manual 76 Stake Points The Stake Points screen in used to locate and stake out points in the field from coordinates in the job file.

Stakeout Menu 77 Rover is greater than 3 m (10 ft) from the design point. Rover is between 0.3 and 3 m (1 and 10 ft), from the design point. Rover

GPS Reference Manual 78 Note: When Store GPS Raw Data on the Job/ Settings/ Measure Mode card (Page R-8) is set to + Rx. Raw (and / or +OBN for Asht

Stakeout Menu 79 Stake to Line – Screen Two The second screen is where measurements take place and the staking directions are displayed. The graphic

GPS Reference Manual 8 Measure Mode Settings The Measure Mode card is used to configure the RTK data collection settings. Receiver Dynamics: is

GPS Reference Manual 80 5 Hz Mode: switches the receiver from one Hz to five Hz mode. When this box is checked, the receiver will compute positions

Stakeout Menu 81 : prompts you for a point name and description and stores a point for the current location. Note: When Store GPS Raw Data on the Job

GPS Reference Manual 82 Although the graphic portion of the screen is continuously updated, the numeric values are not updated until the button is

Stakeout Menu 83 Note: The Vertical Map will show an X at the location of each previous shot. This can be useful in determining if the current terra

GPS Reference Manual 84 VD to HP: is the vertical distance from the rod to the hinge point. HD to CL: is the horizontal distance from the rod to the

Stakeout Menu 85 Show Station and Offset The Show Station and Offset routine allows you to position the rover anywhere near a polyline, a range of

GPS Reference Manual 86 Note: When Store GPS Raw Data on the Job/ Settings/ Measure Mode card (Page R-8) is set to + Rx. Raw (and / or +OBN for Ashte

Stakeout Menu 87 Stake DTM The Stake DTM routine allows you to stake an area and get cut / fill and volume information based on a reference DTM o

GPS Reference Manual 88 Note: When Store GPS Raw Data on the Job/ Settings/ Measure Mode card (Page R-8) is set to + Rx. Raw (and / or +OBN for Asht

Stakeout Menu 89 C.L.: shows the current station and offset information for the rover location relative to the selected centerline. The type of line

Job Menu 9 Note: All receivers need to be in static mode to record Rx. Raw, and some receivers always record Rx. Raw when in static mode. If the co

GPS Reference Manual 90 Inverse Menu All of the routines available from the Inverse Menu are identical to those explained in the conventional Referen

Index A adjust horizontal / vertical64, 65 antenna height ...R-72 ASCII...71, 72 auto detect ...

HARN...5 horizontal datums ...4 HARN ...5 NAD27...4

Index general card.....R-17 receiver card.....R-12 rover radio card...R-17 RTK config card ...R-18 remote elevation