Spectra-precision Survey Pro CE v3.60 GPS User Manual Manual de usuario descargar pdf (Pagina 72)

GPS User’s Manual

Import a .GPS File

You can use

Import Coordinates

from the Job menu to merge DOS

control point measurements (in a *.GPS file) with the local plane

coordinates in a job file.

1. Open the job with the project’s plane coordinates. You can open

the *.CR5 file directly and it will be converted into a .job file or

you can open a new .job file and import the CR5 coordinates.

2. Go to Import Coordinates

from the Job menu. For file

Type

select,

(*.GPS)

and pick the *.GPS file associated with the plane

coordinates.

3. Specify the units of the *.GPS file (for the heights) and tap OK.

4. The GPS coordinates and control point flags for each point in the

*.GPS file will be merged with the plane coordinates for the

corresponding points.

5. If you have more than one *.GPS file associated with a set of

coordinates, you can import them one at a time. The coordinates

from each .GPS file will be assigned a unique set up group so you

can use them for different localization solutions.

Note: If duplicate points are found, you will be prompted to

overwrite or rename. If you choose to rename, a new point is created

with the original plane coordinate and the new geodetic coordinate.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 186 187

Sin comentarios

Spectra-precision Survey Pro CE v3.60 GPS User Manual Manual de usuario Pagina 72