Spectra-precision Survey Pro CE v3.60 GPS User Manual Manual de usuario descargar pdf (Pagina 175)

GPS Reference Manual

Although the graphic portion of the screen is continuously updated,

the numeric values are not updated until the button is tapped.

The correct procedure for slope staking in GPS mode is to use the

graphic portion of the screen to locate the catch point as closely as

possible and press . Once the position is satisfactory, you can

determine if the rover needs to be moved again.

GPS Status

: displays the current solution

type, the number of satellites used, and the

horizontal and vertical precision computed by

the receiver. Tap on this button to open the

detailed GPS Status

screens (Page R-20).

5 Hz Mode

: switches the receiver from one Hz

to five Hz mode. When this box is checked, the

receiver will compute positions five times a

second so the display will update in near real

time while you are roving to the point.

The first button selects the type of slope that

will be used between the catch point and hinge

point from the following options:

• : selects the slope based on the current

rover position. If the rover is above the hinge point, a cut

slope is computed. If the rover is below the hinge point, a fill

slope is computed.

• : forces all computations to be based on a

cut slope.

• : forces all computations to be based on a

fill slope.

The second button selects which information is displayed in the lower

corner of the screen from the following options:

• : displays a cross-sectional view at the current

station.

Note: When you tap a map view, an expanded view of the same map

will fill the screen.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 186 187

Sin comentarios

Spectra-precision Survey Pro CE v3.60 GPS User Manual Manual de usuario Pagina 175