Spectra-precision FAST Survey Reference Manual Manual de usuario descargar pdf (Pagina 338)

100

101

p336

Angle Balance

Select the foresight shot from the last occupied point to the original backsight location. In this example we would select

the leg measured from point 6 to point 7, since point 7 was our foresight angle balance shot to point 2. Press the “OK”

button. In an open traverse, this would be the measured leg that represents the known azimuth or bearing at the end of

the traverse.

Reference Closing Angle

Finally we need to provide the reference closing angle (record). This is the original backsight azimuth. Key in point 1

and point 2, or key in the known azimuth or bearing, followed by the “OK” button.

In an open traverse, key in the stored point numbers that represent the values for the known control points at the end of

the traverse, or key in the known azimuth or bearing.

The adjustment report should be presented, and the adjustment should be complete. The angle balance point number 7

will not be adjusted to fit point number 2, and can be discarded.

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 397 398

Comentarios a estos manuales

Sin comentarios

Spectra-precision FAST Survey Reference Manual Manual de usuario Pagina 338

Comentarios a estos manuales

Relacionado con productos y manuales para Software Spectra-precision FAST Survey Reference Manual