Spectra-precision FAST Survey Reference Manual Manual de usuario descargar pdf (Pagina 136)

p134

Arrow Keys for Joystick

ALT-J will take you directly to the robotics dialog from elsewhere in the program. The arrow-key motion is sometimes

referred to as the Joystick Speed.

Leica:

Tapping once in the direction you want (e.g. up) causes the instrument to move slowly, two taps medium, and 3

taps fast speed. Tapping the other direction (e.g. down) stops the movement.

Geodimeter/Trimble:

Press the arrow key once. After a small delay, the instrument will move an incremental amount.

Do not rush too many presses as they all will be completed.

Topcon:

Holding down the arrow keys on the keypad of the CE data collector allows you to move the base instrument

up and down, left and right. When you release the key, the motion stops.



Search:

This button will initiate a search to look for the prism or reflector. For Leica,

initiates an ATR

search. Pressing the

Quick-Lock

buttons will lock the instrument to the prism and put the instrument

back into tracking mode.



PowerSearch:

For Leica, the

PowerSearch

option will conduct a fast search, typically less than 10 seconds.

PowerSearch

will find the prism regardless of the original direction the instrument is pointing.



QuickLock:

Topcon has an additional search option called

Quick-Lock

which appears when configured for

Topcon 800/8000 Remote using RC2. A

Quick-Lock

search will find the prism in less than 15 seconds.



Standby:

This button takes the instrument out of tracking mode. This is useful, for example, in allowing the user to

set the prism pole down to drive a stake.



Turn to Angle:

This button opens an additional dialog that prompts you for the angle to turn (which can be

entered, picked from the Map, or point-based). See the figure below. You can turn to a known point number or to

an entered horizontal and zenith angle using

Turn Angle

. When enabled, the

Search After Turn

option, searches

and locks on a prism after turning the angle (potentially changing slightly the computed angle).

Change Face

reverses the face. The lower three buttons (

Turn Left 90

Turn 180

and

Turn Right 90

) are common angle turns

and minimize user entry when needed.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 397 398

Comentarios a estos manuales

Sin comentarios

Spectra-precision FAST Survey Reference Manual Manual de usuario Pagina 136

Comentarios a estos manuales

Relacionado con productos y manuales para Software Spectra-precision FAST Survey Reference Manual