Spectra-precision FAST Survey Reference Manual Manual de usuario descargar pdf (Pagina 314)

100

101

p312

Offset>Crt<18.699>/<10.000>

: Enter the desired side line offset (20).

Distance>Crd<57.919>/<10.000>

: Enter the desired frontage offset (65), as measured along the selected side line. If

the Align Settings under Tools is set to Offset-Offset, then the offset distance applies to the minimum separation

distance from the frontage line to the selected building corner. (In our example, the Offset-Offset setting, using the

same offsets of 20 and 65, would shift the building slightly closer to the front lot line, since at the 20 offset, the frontage

lot line is curving away from the building. Offset-Offset holds the offset distance to the actual building corner, and

Offset-Distance measures along the side lot line itself)..

The new building location then draws and the original building remains. If this is correct, use E for Erase to remove the

old building. Otherwise, remove the new building and repeat the process.

1 2 ... 309 310 311 312 313 314 315 316 317 318 319 ... 397 398

Comentarios a estos manuales

Sin comentarios

Spectra-precision FAST Survey Reference Manual Manual de usuario Pagina 314

Comentarios a estos manuales

Relacionado con productos y manuales para Software Spectra-precision FAST Survey Reference Manual