Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Manual de usuario descargar pdf (Pagina 83)

100

101

Conventional Fieldwork

b. Tap the file name that was created earlier listed

in the Open Recent Job list and then tap .Open .

The coordinates for that job are shown here.

2. Set the job settings. (Only the settings that affect

this example are covered here.)

a. Select Job , Settings from the Main Menu

b. Tap the Instrument tab if it is not already selected

and make sure the Manual Mode profile is

activated. If the

symbol is not shown next to it,

select Manual Mode and tap Activate .

c. Tap the Surveying tab and confirm that all of the

checkboxes are unchecked.

d. Tap the Stakeout tab and make sure the Cut

Sheet Offset Stored field is set to Actual Offset.

Note: When performing stakeout, you have the option of

storing cut sheet information. This information is stored

in the raw data file, and when using software on a PC,

such as Survey Link, it can be extracted to create a cut

sheet report.

e. Tap

to save the job settings.

3. Setup your backsight. In this example, we will setup on Point 1

and backsight an object where it is assumed that the direction to

that object is known. When connected to a total station, you

would setup over your occupy point and aim toward the backsight

before continuing.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 366 367

Comentarios a estos manuales

Sin comentarios

Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Manual de usuario Pagina 83

Comentarios a estos manuales

Relacionado con productos y manuales para Software Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual