Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Manual de usuario descargar pdf (Pagina 319)

GPS Module

309

autonomous layer. If you choose to store the point in the Receiver

file only, the Site ID can be any valid name for the receiver and you

are not prompted for layer or attributes.

2. Enter a Description for this point.

Note: If the Site ID or Description is not valid for your model of

receiver, you will be prompted to modify them.

3. Tap Set HR to select an antenna type and enter the slant or

vertical measurement.

4. Tap Apply to send the current station and antenna information to

the receiver. This button may be renamed or disabled depending

on the receiver model.

5. Tap End Survey when you are finished recording data. This closes

the current recording session and file on the receiver. If using a

receiver that supports file downloads, a prompt will open asking if

you want to download the file to the data collector.

Stop & Go Data Collection

1. Choose if you wish to store point in: Receiver and job file or the

Receiver file only. If you choose to store the point in Receiver and

job file, then the Point must be a unique point name in the Survey

Pro job and you will be prompted to put the point on the

autonomous layer. If you choose to store the point in the Receiver

file only, the Site ID can be any valid name for the receiver and you

are not prompted for layer or attributes.

2. Enter a Description for this point.

Note: If the Site ID or Description is not valid for your model of

receiver, you will be prompted to modify them.

3. Tap Set HR to select an antenna type and enter the slant or

vertical measurement.

4. Enter a Duration for this session. If you enter 0 or if you check Log

Until Stop, the session will continue until you tap Stop.

1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 366 367

Sin comentarios

Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Manual de usuario Pagina 319