Spectra-precision Survey Pro v3.80 Ranger GPS User Manual Manual de usuario descargar pdf (Pagina 43)

RTK Data Collection

Note: If you select a point from the job’s control file, you will be

prompted to make a local copy of the point. Control point collection

will add a geodetic coordinate to the point record and points in the

job’s control file cannot be modified.

Note: If

Store GPS Raw

Data on the Measure Mode

card of the Job,

Settings screen is set to

EP + Rx Raw

(or + OBN for Ashtech users),

when you begin a point occupation the control point name is checked

as a valid site ID for the receiver. If it is not a valid site ID, we will

use a modified point name in the receiver’s internal file and make a

note of the modified name in the job’s .RAW file. The point name in

Survey Pro is not changed.

Occupy the point and tap to begin data collection.

When you are happy with the measurement, tap .

Check the Results tab for details of the previous measurement.

Check the Map

tab to see the number and position of control

points for this set up group.

Collect a minimum of 2 control points to solve horizontal

localization. Collect a minimum of three vertical control points to

solve vertical localization. Collect one vertical control point to

solve just the localization vertical shift when using a geoid model.

When you have collected the minimum number of control points,

tap to open the Projection

screen.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 96 97

Sin comentarios

Spectra-precision Survey Pro v3.80 Ranger GPS User Manual Manual de usuario Pagina 43