Spectra-precision Survey Pro v3.80 Ranger GPS User Manual Manual de usuario descargar pdf (Pagina 38)

GPS User’s Manual

SET Base at Known Geodetic Coordinate

Tap to configure the base receiver with this position and

begin broadcasting RTK corrections over the radio link.

Note: If you have post processing data collection turned on, the

receiver will now open a file (with the next available default name),

start recording GPS raw data, and enter the station and antenna

information for this setup.

When done, you will return to the Current GPS Base screen

where the base station details are displayed.

Tap to return to the Survey

menu.

GET Autonomous Base Position

If you are starting from a new point in the job, you can GET an

autonomous GPS position from the receiver to SET the base reference

position and configure the base coordinate in Survey Pro.

Tap to get an autonomous position from the

receiver. If you wish to get an averaged position, enter a number

Average position [n] epochs before GET

Check the results displayed in the edit boxes. If it looks good, tap

to configure the base receiver with this position and begin

broadcasting RTK corrections over the radio link.

Note: If you have post processing data collection turned on, the

receiver will now open a file (with the next available default name),

start recording GPS raw data, and enter the station and antenna

information for this setup.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 96 97

Sin comentarios

Spectra-precision Survey Pro v3.80 Ranger GPS User Manual Manual de usuario Pagina 38