Spectra-precision Survey Pro 3.80 Recon GPS Reference Manual Manual de usuario descargar pdf (Pagina 90)

GPS Reference Manual

Show Station and Offset

The Show Station and Offset routine allows you to position the rover

anywhere near a polyline, a range of points that define a line, or an

alignment to see where the rod is located in relation to the selected

line.

The first screen of this routine is similar to the conventional method,

except that the button is replaced with a button

to configure rover antenna and the backsight information is replaced

with rover antenna height information. See the conventional

Reference Manual for details.

Show Station – Screen Two

Once the line is selected, the second screen is opened where

information is displayed about the rod position and the selected line.

GPS Status

: displays the current solution type, the

number of satellites used, and the horizontal and vertical

precision computed by the receiver. Tap on this button

to open the detailed GPS Status

screens (Page R-20).

5 Hz Mode

: switches the receiver from one Hz to five Hz

mode. When this box is checked, the receiver will

compute positions five times a second so the display will

update in near real time while you are roving to the

point.

/ : switches from

ROVING

OCCUPYING

mode. When ROVING, the receiver is in

dynamic mode and will calculate your position as you

move to the point. When

OCCUPYING,

the receiver is

switched to static mode (depending on settings) and will

calculate the most precise position for the staked point.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 98 99

Sin comentarios

Spectra-precision Survey Pro 3.80 Recon GPS Reference Manual Manual de usuario Pagina 90