Spectra-precision Survey Pro 3.80 Recon GPS Reference Manual Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Survey Menu – RTK
25
Base Setup
The Base Setup screen is used to set the base point in Survey Pro and
to configure the receiver to begin broadcasting differential
corrections.
Note: If you are in
Manual Mode
, you can set the base in Survey Pro
for the purposes of doing GPS calculations without having to connect
to a receiver.
When you tap the Base Setup menu item, the Current
GPS Base Station information screen is displayed.
Base Point
: displays the current base point name, if set.
Base:
Status
: displays the status of the base.
Latitude
: displays the current latitude of the base
point set in Survey Pro.
Longitude
: displays the current longitude of the
base point set in Survey Pro.
Height
: displays the current height of the base
point set in Survey Pro.
Antenna
: displays information about the antenna if it is
available.
: opens the Base Setup
wizard where the base position can be
set and the receiver configured for RTK and post processing data
collection.
: (visible only in
Manual Entry
mode) clears the existing base
setup so you edit the point if necessary.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 98 99

Comentarios a estos manuales

Sin comentarios