Spectra-precision FAST Survey Manual de usuario descargar pdf (Pagina 35)

English

These settings are detailed below.

Device:

The device used may be one of the following:

1. An internal or external radio receiver. Corrections will be

received through a UHF radio link.

2. An internal or external GSM modem. Corrections will be

received through either a network connection, of the

NTRIP or Direct IP type (TCP/IP or UDP/IP), or a phone-

like connection, of the Direct Dial type (modem operated

in CSD mode). To acquire corrections from a base

delivering its corrections in Direct Dial mode, you should

have been given the phone number so the rover can call

the base.

Internal vs. external modems:

– With ProMark 220, the internal modem is located in

the GNSS receiver/data collector and the external one

in a third-party device.

– With ProMark/ProFlex 800, the internal modem is

located in the GNSS receiver – not in the data

collector– and the external modem is located either in

the data collector running FAST Survey, or in a third-

party device.

– With EPOCH 50, the GSM modem can only be

external, either coming as a standalone device, or

being part of the data collector used to configure the

rover.

3. Another device connected to the data collector through a

cable connection. This may be any radio receiver not

supported directly by FAST Survey.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Sin comentarios

Spectra-precision FAST Survey Manual de usuario Pagina 35