Spectra-precision FAST Survey Manual de usuario descargar pdf (Pagina 29)

English

Configuring a Rover

The following Spectra Precision GNSS receivers may be used

as a rover: ProMark 700, ProMark 800, EPOCH 50, ProFlex

800 or ProMark 220.

Prerequisites For ProMark 220:

• If you are using the internal GSM modem, insert the SIM

card making possible the use of the modem.

• If you are using an external radio, connect that radio to the

receiver using a POGO cable (see Using an External Radio

with a ProMark 220 on page 53).

• Connect the external antenna to the receiver

• Power on the receiver, run FAST Survey and open a job

file.

• Set the tracking mode using GNSS Toolbox. FAST Survey

will only be able to work from the signals selected with this

utility.

– Assuming ProMark 220 is the currently selected GNSS

receiver in FAST Survey (Current tab), running GNSS

Toolbox from within FAST Survey is simply done by

selecting Equip > GPS Utilities > GNSS Toolbox > GNSS

Settings.

– Select the desired option from the Tracking mode drop-

down list. You can also set the elevation mask, enable

or disable the use of SBAS and QZSS and preset the

model of external antenna used.

– Then tap OK twice to return to the Equip menu.

For all other receivers:

• If you are using a GSM modem (whether internal or

external), insert the SIM card making possible the use of

the modem.

• If you are using an external radio receiver, connect that

radio to the receiver and turn it on.

• Make sure an external GNSS antenna is connected

(ProFlex 800).

• Power on the GNSS receiver and data collector.

• Run FAST Survey and open a job file.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Sin comentarios

Spectra-precision FAST Survey Manual de usuario Pagina 29