Spectra-precision Survey Pro v5.1 Manual de usuario descargar pdf (Pagina 71)

Memo for GNSS Users • You are using the following equipment:

– a Bluetooth-equipped Spectra Precision GNSS receiver capable of

detecting automatically the format of received corrections.

– A data collector fitted with Bluetooth and an embedded GSM modem.

• You are working in a network (remote base) over the Internet.

• You are using a known coordinate system (and possibly a geoid).

• You want to start your project from a new, empty job file.

Surveying with Survey Pro may be summarized as follows:

• Turn on your receiver.

• Start Survey Pro on the data collector.

• Create a job in which you select the coordinate system (and geoid) used.

• Tap the instrument icon and select Switch to GNSS.

•Tap Add Receiver, search for Bluetooth devices, set Survey Pro for a

Bluetooth connection with the receiver.

•Tap Connect.

• Set the data link for the rover to be able to receive corrections from the

network.

•Go to GNSS Status and check that enough satellites are received.

•Go to Survey >Start Survey.

•Tap Connect to re-connect to your receiver.

• Wait until the rover receives data from the base.

• Confirm/change the point where the base is located.

• Set acceptance criteria for all your measurements.

• Make sure the receiver continuously delivers a “Fixed” position solution.

• Start collecting your data (points, offset points, lines). Data may be

collected using one epoch of data (always the case when collecting data

along a line), or by averaging the position through a static occupation on

each point.

• When finished, select End Survey on the Home screen.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76

Sin comentarios

Spectra-precision Survey Pro v5.1 Manual de usuario Pagina 71